This shows you the differences between two versions of the page.

Link to this comparison view

public:hardware:headnode:start [2012/04/16 14:58]
public:hardware:headnode:start [2014/03/20 14:09] (current)
Line 1: Line 1:
 ====== ExoGENI Head Node ====== ====== ExoGENI Head Node ======
-==== Example Hardware Specs ==== +==== IBM x3650 M4  ==== 
- +Part Number Description Quantity 
-Vendor Model Revision CPU(s) ^ CPU Speed ^ CPU Cores ^ CPU Count ^ RAM ^ HDD ^ 1GB NICs | +7915AC1|IBM System x3650 M4|1| 
-IBM | x3650 M3 7945-AC1 Intel Xeon E5620 2.40GHz 8 x 2GB DDR3 PC3-10600 1333MHz ECC | &gt500 GB +A2N2  |ServeRAID M5110e SAS/SATA Controller for IBM System x| 
- +A1JX  |x3650 M4 8x 2.5&quotHS HDD Assembly Kit| 
- +| A1LF  |IBM System x Lightpath Kit
- +| 3757  |IBM Single Cable USB Conversion Option (UCO)| 
-==== Network Configuration ==== +A3V6  |IBM System x3650 M4 Planar (IVB Refresh )| 
- +6263  |4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
-=== Interfaces === +A1LA  |x3650 M4 System Level Code| 
- +A1ML  |IBM Integrated Management Module Advanced Upgrade
-^ Bond ^ Slave Interfaces ^ VLAN(s^ Tagging ^ Purpose ^ +A1JZ  |System Documentation and Software-US English| 
-bond0 eth0 (from public); eth4 (from Port 47 on BNT8052) | 1010 untagged Public +9206  |No Preload Specify
-bond1 eth1, eth5 1009 untagged iSCSI +| A2R0  |x3650 M4 Mini SAS Cable 820MM| 
-bond2 eth2,eth3,eth6,eth7 1006,1007,1008 tagged Mgt, OpenStack, xCAT +| A1L8  |x3650 M4 Riser 2 Bracket| 
- +| A1JP  |x3650 M4 PCIe Riser Card 1 (1 x16 FH/FL + 1 x8 FH/HL Slots)| 
-=== A Word on Public Interface Connection === +| 5977  |Select Storage devices no IBM-configured RAID required| 
-In an ideal scenario, the head node has public access failover capability, via a bonded active/active or active/passive interface.  In that scenario, the provider has two cables providing public-facing connectivity.  One runs to the head node, and the other runs to the SSG5.  For example: +| A1KF  |IBM System x3650 M4 2.5" Base without Power Supply| 
- +| A1LB  |x3650 M4 Agency Label GBM| 
-  * Go to eth0 on head node +| 8971  |Integrate in manufacturing| 
-  * Goes to 0/0 on SSG5 +| 2306  |Rack Installation >1U Component| 
-    * Go to port 48 on mgt switch (BNT8052) +| 8034  |e1350 Solution Component| 
-    * Go from port 47 on mgt switch back to eth4 on head node +| A193  |Integrated Solutions| 
- +| 3101  |Rack 01| 
-The SSG5 has an IPSEC tunnel back to an SSG5 tunnel at RENCI.  If the cable running to eth0 loses network connectivitythen hopefully the head node would still be able to speak to RENCI via the SSG5 link+| A2U4  |IBM 128GB SATA 2.5" MLC HS Enterprise Value SSD|2| 
- +| A1H5  |IBM System x 750W High Efficiency Platinum AC Power Supply|2| 
-=== Example RHEL/CentOS ifcfg-device scripts === +| A3VY  |Addl Intel Xeon Processor E5-2640 v2 8C 2.0GHz 20MB Cache 95W| 
- +| 3737  |3m Molex Direct Attach Copper SFP+ Cable| 
-  * /etc/sysconfig/network-scripts/ifcfg-bond0 +| A3QE  |4GB (1x4GB1Rx4, 1.35V) PC3L-12800 CL11 ECC DDR3 1600MHz LP RDIMM|8| 
-<code> +| 6311  |2.8m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable| 
-DEVICE="bond0" +| A3VE  |Intel Xeon Processor E5-2640 v2 8C 2.0GHz 20MB Cache1600MHz 95W| 
-BOOTPROTO="none" +| A2ZQ  |Mellanox ConnectX-3 EN Dual-port SFP+ 10GbE Adapter|2| 
-ONBOOT="yes" +| A1JU  |x3650 M4 PCIe Gen-III Riser Card 2 (1 x8 FH/FL + 2 x8 FH/HL Slots)| 
-NETWORK="X.X.X.0" +| A2HR  |Configuration ID 03| 
-NETMASK="" +| 3222  |Rack location U22| 
-BROADCAST="X.X.X.255" +| 5374CM1|Configuration Instruction| 
-IPADDR="X.X.X.Y" +| A2N2  |ServeRAID M5110e SAS/SATA Controller for IBM System x| 
-BONDING_OPTS="mode=balance-alb miimon=25" +| A2L4  |ServeRAID M5100 Series 1GB Flash/RAID 5 Upgrade Placement| 
-</code>+| A2JX  |Controller 01| 
 +| A2HR  |Configuration ID 03|